文章正文

华为S2000(2403的指示灯在口上边一排,2000的在最左侧) 细分VLAN脚本 改管理VLAN1为255,登陆用户名admin密码beelink

重设配置信息:启动时根据提示按ctrl+B,提示输入密码时,要么为空要么为(huawei?)进入高级配置选项菜单,选择7(启动时忽略配置信息),选择yes,然后reboot,重新配置,配置完成再进入上一步选择no,重启后完成

reset saved-configuration
y
(直接断电,否则清除不掉)
system-view
vlan 255
q
vlan 301 to 348
management-vlan 255
inter Vlan-interface 255
ip add 10.2.50.5 255.255.252.0
quit
ip route-static 0.0.0.0 0.0.0.0 10.2.48.1
snmp-agent sys-info version all
snmp-agent community read CanoMe0s
snmp-agent community write netman
interface Ethernet 1/0/1
port access vlan 301
interface Ethernet 1/0/2
port access vlan 302
interface Ethernet 1/0/3
port access vlan 303
interface Ethernet 1/0/4
port access vlan 304
interface Ethernet 1/0/5
port access vlan 305
interface Ethernet 1/0/6
port access vlan 306
interface Ethernet 1/0/7
port access vlan 307
interface Ethernet 1/0/8
port access vlan 308
interface Ethernet 1/0/9
port access vlan 309
interface Ethernet 1/0/10
port access vlan 310
interface Ethernet 1/0/11
port access vlan 311
interface Ethernet 1/0/12
port access vlan 312
interface Ethernet 1/0/13
port access vlan 313
interface Ethernet 1/0/14
port access vlan 314
interface Ethernet 1/0/15
port access vlan 315
interface Ethernet 1/0/16
port access vlan 316
interface Ethernet 1/0/17
port access vlan 317
interface Ethernet 1/0/18
port access vlan 318
interface Ethernet 1/0/19
port access vlan 319
interface Ethernet 1/0/20
port access vlan 320
interface Ethernet 1/0/21
port access vlan 321
interface Ethernet 1/0/22
port access vlan 322
interface Ethernet 1/0/23
port link-type trunk
port trunk permit vlan 1 255 301 to 348
interface Ethernet 1/0/24
port link-type trunk
port trunk permit vlan 1 255 325 to 348
interface GigabitEthernet1/1/1
shutdown
interface GigabitEthernet1/1/2
shutdown
interface GigabitEthernet1/2/1
shutdown
interface GigabitEthernet1/2/2
shutdown
q
user-interface vty 0
user privilege level 3
set authentication password simple beelink
q
q
save
y

文章来自绿盟(xDowns.com)转载请注明来路。

上一篇文章：ubuntu amd显卡驱动安装教程 []

相关文章

相关软件